Standard Features Include:
技术特点： 
 
Constructed  from  all  white  stress  relieved,  acid  resistant,  non-corrosive  “semiplastic”
polypropylene. All heat seam welded construction and tested. 
       柜体*采用中国台湾*“semiplastic”（瓷白色聚丙烯）PP 板材制作，具有的耐酸碱性，经无缝焊接测试完成。 
 
      Specific material selection for use with harsh corrosive acids and trace metal analogy. 
      苛刻的用料保证其可以抵抗严苛的酸碱环境。

    System includes ergonomic-sloping front design for easy access & cleaning.
人体工程学应用其中，保证操作的轻松及清洁的便捷。 
 
The  work  top  is  constructed  from  6-12mm  thick  polypropylene.  The  front  of  the  unit  will incorporate a raised front lip for spill containment with airfoil.
操作面为 6-12mm厚聚丙烯板材加工制作，前端做突起设计，防止可能的溅漏。 
 
Below the work top is room to allow for storage space. This storage space is accessed via sliding doors in front and internally removable panels in the rear. （can be vented to exhaust duct）
操作面下部设置储藏空间。可应用拉门或滑门设计，并加装内置抽屉。（可与排风管连接做负压设计） 
 
Counter-weighted, abrasion resistant, clear polymethylmethcrylate （pmma） front sash, vertically gliding, fitted with sash stops.
垂直调节视窗装备透明 pmma 有机玻璃，精确的配重使其可以轻松滑动，精准静止于任何高度。 
 
Incorporates a rear baffle and internal ceiling panel to promote horizontal air flow.
拥有高精度内部后导流板设计保证气流均匀、*、无逆流。上部倒流板角度设计保证zui小的涡流发生、降低噪音。坚决保护您的安全。 
 
A valve panel has been incorporated for mounting of remote valves and services when required   and is located just below the spill containment lip.
控制面板位于操作面下部，可根据实际需求加装各类遥控阀门以及电器设备。 
 
The storage cabinet can be vented to main plenum。
下部储物空间可做负压设计，防止气体外溢。 
 
Supplied with a fluorescent light fixture in an all-polypropylene compartment,
all welded with a polypropylene lens with all plastic hardware.
照明设备为聚丙烯材质外壳内置荧光灯，由同材质聚丙烯焊条无封焊接。 
 
A sealed light switch/circuit breaker operates the light and is located above the hinged sash.
断路器保护下的密封防化灯保证柜内任何角度至少 80 尺烛光照明亮度。充分满足应用需要，保护您的安全以及舒适。 
 
Top-located exhaust collar（s） allows for customer connection.
排风管已位于通风柜顶端，以供日后与总风道连接。 
 
Located on the top or back, is a junction box to allow for electrical connection.
接线盒位于顶部或者后部，以供日后维修以及接线。 
 
Configured for 100 VAC, 50 Hz or 220 VAC, 50 Hz electrical access （preference requested）.
电源为  100 VAC，50 Hz  或  220VAC，50 Hz （根据需求选择）。 

   柜体尺寸：756mm（深）X864mm（高），宽度可根据现场尺寸定制。

    Shipped assembled, fully tested and ready to use. 
    一切就绪，恭候您的使用。