品牌
其他厂商性质
所在地
厂家长期定制中空吹瓶机 全自动吹瓶机 小型中空吹瓶器吹瓶机
面议广东乐善10L把手瓶吹瓶器 PE双螺杆挤出吹塑机 全自动吹瓶机吹瓶机
面议厂家定制海洋球吹塑机 全自动吹瓶机双环塑料桶生产设备吹瓶机
面议2020新款线机油瓶液位上吹连续挤料式吹塑机 全自动吹瓶机 吹瓶机
面议塑料吹瓶机 全自动半自动吹瓶机器 pp挤出吹瓶机K型吹瓶机
面议2020新款PE半自动吹瓶机中空吹塑机 变频调速挤出电机吹瓶机
面议厂家专业制造 pe塑料全自动吹瓶机 广口瓶专用大型吹塑机机油罐专项机系列
面议厂家专业制造 pe塑料全自动吹瓶机 广口瓶专用大型吹塑机大型吹瓶机
面议一步法中空挤出机 PE全自动洗涤用品专用吹瓶机 节能吹塑机洗涤用品专机吹瓶机
面议乐善洗涤用品专用吹瓶机 多层多模头吹瓶机 吹塑机洗涤用品专机吹瓶机
面议厂家专业制造 pe塑料全自动吹瓶机 广口瓶专用大型吹塑机Y型机系列
面议一步法中空挤出机 PE全自动洗涤用品专用吹瓶机 节能吹塑机U型吹瓶机
面议类别Category | 小Y型机系列(3导柱型Petg机)/Y Series(3 Tie Bar for Petg bottles) | |||
机型 Model | 100Y+H+S1X1.100D | |||
项目 | Items | 单位 Units | 参数Specification | |
基本参数 Specification | 类别 | Category | / | 直线导轨Linear Guide Way |
制品大容积 | Max. Blow Volume | L | 100 | |
适用原料 | Material | / | PE,PP,PS,PC,PVC | |
模头坯料数量 | QTY Of Die Head | / | 1 | |
常用模头中心距 | Die Head Distance (Center to Center) | mm | / | |
机器净重约 | Net Weight | kg | 11500 | |
机器外形尺寸 | Machine Dimension | mm L×H×W | 5940X3800X2100 | |
模头 Die Head | 模头加热段数 | Die Head Heating Zone | / | 3 |
模头加热功率 | Die Head Heating Power | kW | 22 | |
锁模架系统 Carriage system | 模架数量 | QTY Of Station | / | 1 |
小合模距 | Min Mold Closing Distance | mm | 500 | |
大开模距 | Max Mold Openning Distance | mm | 1200 | |
模板尺寸 | Effective Dimension Of Mold Plate | (mm,W×H) | W1050×H1350 | |
摆架行程 | Carriage Stroke | (mm) | / | |
锁模力 | Clamping Force | kN | 500 | |
挤出系统 Extruder Unit | 螺杆直径 | Extruder Diameter | mm | 100 |
螺杆长径比 | Extruder Length/Diameter Ratio | L/D | 27 | |
螺杆转速 | Extruder Rotating Speed | r/min | 20-71 | |
大塑化能力 | Max Extrusion Capacity | kg/h | 230 | |
挤出电机额定功率 | Extruder Motor Rated Power | (kW) | 75/90 | |
机筒加热段数 | Barrel Heating Zone | / | 5 | |
机筒加热功率 | Barrel Heating Power | kW | 30 | |
冷却风机功率 | Cooling Fan Power | kW | 1.85 | |
动力系统 Power Unit | 油泵电机额定功率 | Oil Pump Motor Rated Power | kW | 30 |
液压系统额定工作压力 | Hydraulic System Rated Wong Pressure | Mpa | 16 | |
气动系统额定工作压力 | Pneumatic System Rated Wong Pressure | Mpa | 0.8 | |
水冷系统额定工作压力 | Cooling System Rated Wong Pressure | Mpa | 0.4 | |
通用制品耗气量(压缩后) | Universal product air consumption(compressed) | m³/h | 20 | |
热切刀变压器功率 | Hot Cutter Power | kW | / | |
装机总功率I | Total Installed Power | kW | 166.35/181.35 | |
备注 Remarks | 液压油牌号/油箱容积 | Hydraulic oil NO. / tank volume | L | 46#/80L |
冷水机选型(风冷/水冷) | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | |
空压机选型(加储气罐) | Air compressor recommend (Add gas storage tank) | hp | 10 | |
备注: 1、各机型的加热功率与模头配置有关,因模头配置不同,可能出现加热功率稍有差异的情况。 2、本参数表仅供参考,实际机型参数可能会有所调整。 | ||||
Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. |