品牌
其他厂商性质
所在地
DQ-550WV卧式圆盘双色机参数:
| 性質: Properties | 單位 | DE500DC | ||
| 適用原料:熱可塑性Thermoplastic | UNIT | 主射出 | 副射出 | |
| 射出系統 | 螺桿直徑Screw diameter | mm | 50 | 260 |
| 螺桿長徑Screw L/D ratio | - | 22 | 22 | |
| 射出量Injection weight (PS) | gram | 473 | 473 | |
| oz | 16.7 | 16.7 | ||
| 理論射出容積Swept volume | cm3 | 510 | 510 | |
| 射膠壓力Injection pressure | kg/cm2 | 2393 | 2393 | |
| 射出率Injection rate | cm3/sec | 222 | 222 | |
| 射出行程Injection stroke | mm | 260 | 260 | |
| 射出時間Injection time | sec | 2.3 | 2.3 | |
| 料管中心距离 | mm | 650 | ||
| 夾模系統 | 夾模行程Clamping stroke | mm | 600 | |
| 閉模力Clamping force | ton | 550 | ||
| 模厚Mold thickness(min~max) | mm | 320~800 | ||
| 大柱內距Inner distance of tie bars(HxV) | mm | 912′912 | ||
| 模板尺寸Mould plate(HxV) | mm | 1312′1312 | ||
| 托模行程Ejection stroke | mm | 150 | ||
| 托模力Ejection force | ton | 7 | ||
| 轴盘直径 | mm | 1230 | ||
| 模具数量 | set | 2 | ||
| 電熱系統 | 電機馬達Pump driving motor | kw | 30+30 | |
| 泵浦壓力Pump pressure | kg/cm2 | 140 | ||
| 電熱容量Heater capacity | kw | 14.55 | 14.55 | |
| 溫度段數Heat zones | set | 6 | 6 | |
| 動力總負荷Total power | kw | 89.1 | ||
| 其他 | 油箱容量Tank capacity | l | 800 | |
| 機器尺寸Machine measurements(LxH) | m | 8.0′2.2′2.5 | ||
| 機器重量Net weight | kg | 28500 | ||
