品牌
其他厂商性质
宁波市所在地
产品参数
| 项目 | DESCRIPTION | UNIT | BL200HS | ||
| 标准规格 | International specification | 725/2000 | |||
| 螺杆直径 | Screw diameter | A | B | C | |
| mm | 40 | 45 | 50 | ||
| 螺杆长径比 | Screw ratio | 23 | 20 | 18 | |
| 理论注射容积 | Theoretical injection capacity | cm3 | 285 | 360 | 445 |
| 注射量 (以PS计) | Shot weight(PS) | g | 260 | 330 | 410 |
| oz | 9.2 | 11.6 | 14.3 | ||
| zui大注射速度 | Injection piston speed | mm/s | 300 | ||
| 注射速率 | Injection rate | g/s | 251 | 318 | 393 |
| 注射压力 | Injection pressure | Mpa | 256 | 203 | 164 |
| 射胶行程 | Injection stroke | mm | 225 | ||
| zui大螺杆转速 | Max. Screw speed | r/min | 300 | ||
| 锁模力 | Clamping force | Ton | 204 | ||
| kN | 2000 | ||||
| 开模行程 | Opening stroke | mm | 530 | ||
| 拉杆内间距 | Space between tie bar | mm×mm | 560×510 | ||
| zui小模具厚度 | Min. mould height | mm | 200 | ||
| zui大模具厚度 | Max. mould height | mm | 560 | ||
| zui大模板距离 | Max. distance Platen | mm | 1090 | ||
| 顶出行程 | Ejector stroke | mm | 150 | ||
| 顶出力 | Ejector force forward | kN | 62 | ||
| 顶针回缩力 | Ejector force back | kN | 41 | ||
| 顶出杆数 | Number of ejector bar | PC | 9 | ||
| 系统压力 | Sys. Pressure | MPa | 16 | ||
| 电机功率 | Pump Motor | kW | 22 | ||
| 电热功率 | Heater power | kW | 11 | ||
| 温控区数 | Number of temp. zones | 3+1 | |||
| 油箱容量 | Oil tank capacity | L | 220 | ||
| 机械外形尺寸 | Machine dimensions(L×W×H) | m×m×m | 5×1.3×1.9 | ||
| 机器重量 | Machine weight | Ton | 5.3 | ||
