品牌
代理商厂商性质
深圳市所在地
称重控制器 SSM-10K LBS
面议SSM-8K LBS 称重仪表
面议SSM-5K LBS 称重控制器
面议SSM-2.5K LBS 称重控制器
面议SSM-2K LBS 测力传感器
面议SSM-1K LBS称重传感器
面议SSM-500 LBS 称重传感器
面议美国Transducer Techniques 传感器
面议美国Transducer Techniques SSM-100 LBS 称重传感器
面议SSM-50 LBS称重传感器
面议美国Transducer Techniques SWP-50K LBS 传感器
面议SWP-20K LBS 称重传感器
面议SWS-10 LBS 称重传感器 SWS-10 LBS 称重传感器 SWS-10 LBS 称重传感器
SWS SERIES CAPACITY RANGES: 10, 20, 50, 100, 250, 600, 1,000 FT. LBS.
Our SWS Series reaction type socket wrench torque sensors are available in ranges from 10 ft-lbs. through 1000 ft-lbs. and provide accurate measurements of bolt or nut wrenching torques. These sensors are bi-directional so both tightening and break-away torques can be measured. These low cost sensors deliver high accuracy and outstanding frequency response. Calibration of mechanical torque wrenches may be performed with this sensor. The sensing element incorporates bonded foil strain gages of the highest quality.
参数
Rated Output (R.O.): 2 mV/V nominal
Nonlinearity: 0.2% of R.O.
Hysteresis: 0.2% of R.O.
Nonrepeatability: 0.1% of R.O.
Zero Balance: 1.0% of R.O.
Compensated Temp. Range: 60° to 160°F
Safe Temp. Range: -65° to 200°F
Temp. Effect on Output: 0.005% of Load/°F
Temp. Effect on Zero: 0.01% of R.O./°F
Terminal Resistance: 350 ohms nominal
Excitation Voltage: 10 VDC
Safe Overload: 150% of R.O.
订货型号
SWS-10 10 1/4 2.063 1.312 .375 .625
SWS-20 20 1/4 2.063 1.312 .375 .625
SWS-50 50 3/8 2.312 1.312 .500 .875
SWS-100 100 3/8 2.350 1.312 .500 .875
SWS-250 250 1/2 2.625 1.500 .688 1.125
SWS-600 600 3/4 3.938 2.000 1.063 1.625
SWS-1K 1,000 1.0 4.375 1.875 1.125 2.500