品牌
其他厂商性质
杭州市所在地
销售apilon 52 TPU A-63 E
面议销售apilon 52 TPU A-56 E
面议销售apilon 52 TPU A-6505
面议销售apilon 52 TPU A-68 E
面议销售apilon 52 TPU A-70 E
面议销售apilon 52 TPU A-7005
面议销售apilon 52 TPU A-7505
面议销售apilon 52 TPU A-8505
面议销售apilon 52 TPU D 25 L
面议销售apilon 52 TPU D 30 L
面议销售apilon 52 TPU D1 40 L
面议销售apilon 52 TPU D1 50 L
面议products have been specified in a wide range of injection molded applications such as automotive under-the-hood parts, power train components, pumps, fuel system components, surface mount electrical/electronics components, blower and pump parts, protective and non-stick coatings, surgical devices and power tools. PPS can be extruded or blow molded, may be used to produce films and composites, and is an excellent candidate for fuel cells and diesel fuel cars.
In selecting the materials for this technical solution, the Japanese specialist in entertainment electronics together with Polyplastics (the affiliate in Asia) opted for two materials from : Vectra liquid crystal polymer (LCP) and polyphenylene sulphide (PPS). In various CD/MD players for stationary hi-fi equipment, Sony uses moving magnets instead of the usual rollers. Sony refers to this type of drive as the A-MAX system (Advanced Moving Magnet 2 Axis).
Once again, Vectra LCP was able to meet the application requirements. For the slot for the CD carriage, Sony chose glass-fibre-reinforced . The high rigidity and strength of this easyflowing PPS from were crucial here.Vectra is used to produce the baseplate which is movable along two axes. In this application, a mechanical property profile tailored to the special operating conditions in a CD/MD player was required, i.e. high elastic modulus and high impact strength. Vectra was able to meet the necessary requirements without any problem. For the lens holder, on the other hand, the important criterion was lightweight coupled with good rigidity to exclude any disturbing high-frequency resonances.
Domestic Water Supply Manifold
In collaboration with Hoechst Technical Polymers Division, UK, extensive FEM and mould flow studies produced a robust casing made from Hostaform C 2521. The demands made on such components are considerable. For example, the casing must withstand a pressure of 12 bar for 50 years and have correspondingly high creep and fatigue strength.
Other mouldings in the tap are also made from polymers. The shut-off lever and the connector consist of glass-fibre-reinforced Hostaform GV 1/30 owing to its high strength and rigidity. The slip properties of a Hostaform C 9021 K ball in the valve mechanism ensure long-term smooth operation. Finally, the retention clamps, which are subjected to extremely high mechanical loads, are injection moulded from 1140L4 reinforced with 40% glass fibre.In domestic water taps from Atlantic Plastics, a number of materials ensure permanent smooth operation and freedom from leaks.
In Great Britain, domestic water consumption is usually estimated from the household size. However, the installation device for domestic water taps from the British company Atlantic Plastics allows simple connection of a water meter.
东莞市龙辉祥塑胶原料公司是一家专业从事塑胶原料进口贸易公司。主营各国通用塑胶、工程塑胶、特种工程塑胶。公司以“诚信为本,创新求魂”的精神在客户中树立了良好的口碑。从进口到出口严格把关,可提供COA,SGS,UL黄卡!保证原厂原包!我是龙辉祥,期待你的来电!
电 话:
传 真:
手 机:
:罗(业务)