SZ-3000A 注塑机
产品简介
详细信息
SZ-3000A注塑机的技术参数
Technical Data for SZ-3000A Injection moulding machine
| 项目Item | 单位Unit | 参数Data | ||
| 合模力Max. clamping force | KN | 3000 | ||
| 移模行程Max. opening force | mm | 590 | ||
| 拉杆有效间距（V×H）Space between tie bars | mm | 610×610 | ||
| 允许的模厚（min-max）Mould height | mm | 220-630 | ||
| 模板zui大开距Max. daylight | mm | 1220 | ||
| 液压顶出力Ejector force | KN | 70.6 | ||
| 液压顶出行程Ejector stroke | mm | 150 | ||
| 液压顶出杆的总数Ejector quantity | | 9 | ||
| 螺杆的直径Screw diameter | mm | 60 | 65 | 70 |
| 螺杆的长径比Screw L/D ratio | L/D | 22.7 | 21 | 19.5 |
| 理论注射容积Theoretical shot volume | cm3 | 848 | 995 | 1154 |
| 注射质量（PS料）Plasticising weight（PS） | g | 772 | 905 | 1050 |
| 注射压力Injection pressure | Mpa | 207 | 176 | 152 |
| 理论注射速率（PS料）Theoretical injection rate（PS） | g | 241 | 283 | 328 |
| 塑化能力（PS料）Plasticising capacity（PS） | g/s | 35．2 | 43．3 | 51．8 |
| 螺杆驱动扭矩Screw torque | N.m | 2530 | ||
| 螺杆zui高转速Max. screw rotate speed | r/min | 150 | ||
| 注射行程Injection stroke | mm | 300 | ||
| 油泵电动机功率Pump motor power | KW | 30 | ||
| 油泵zui高压力Pump pressure | Mpa | 16 | ||
| 料筒加热功率Heating power | KW | 22 | ||
| 加热区段Heating zone | | 5 | ||
| 机器的外形 （L×W×H）Size | m | 6.7×1.75×2.25 | ||
| 机器的净重 Net weight | t | 11 | ||
| *型号International designation | | 3000-1750 | ||